ASTM D2990 PDF
ASTM D – Air Permeability of Textile Fabrics . ASTM D testing determines the tensile and compressive creep and creep-rupture of plastics under. ASTM D CREEP TESTING. These test methods cover the determination of tensile and compressive creep and creep-rupture of plastics under specified. Creep tests are described in the following standards: ISO , ISO , and ASTM D A full notch creep test (FNCT) to ISO is used to test pipes.
|Published (Last):||17 July 2004|
|PDF File Size:||7.72 Mb|
|ePub File Size:||8.82 Mb|
|Price:||Free* [*Free Regsitration Required]|
The specimen strain is determined optically by modern creep test systems that use a high-precision video measurement system. The electromechanical creep testing machine, KappaMultistationis equipped with a load cell and one drive per test axis.
The standard X2990 specimen has dimensions of 10 x 4 x 80 mm and is taken from the mid-section of the multi-purpose specimen. For this reason it is necessary to ensure that the ambient temperature remains constant throughout the test. Along with creep testing,they can be used for quasistatic test methods, for example, to perform a tensile test to ISO It is necessary to prevent thermal expansion due to temperature fluctuations, which overlap the creep strain.
They provide slip-free gripping of the specimen, typically specimen type 1A to ISO Electromechanical Creep Testing Machines The Kappa creep testing machine is equipped with a central lead screw and is suitable for creep tests and advanced creep tests requiring maximum precision in force control.
Tensile creep modulus and the nominal tensile creep modulus Creep tensile strength Creep curves with logarithmic time axis Creep module time curves with logarithmic time axis Isochrone stress-strain curves Recovery strain curve. Deflection is measured using either the die movement after correction to the self-deformation of the test arrangement or using a video measuring system. The test load is calculated according to the requirements and must be applied without jolts and then held constant.
In this way it is possible to achieve statistically verified test results. Flexure creep modulus Creep flexural strength Creep curves with logarithmic time axis Creep module time curves with logarithmic time axis Isochrone stress-strain curves.
The materials covered range from simple polyolefins to high-performance thermoplastics. Using this data, creep curves can be generated, which depict the long-term behavior of plastics.
ASTM D – CREEP TESTING
The testing machines are equipped with multiple test axes. Since this type of test runs over a long period of time, it is typical to test multiple specimens at once. Specimen strain is recorded by a state-of-the-art measuring system. The test axes are equipped with tensile specimen grips. It is mounted behind the test axes to allow access to the system by the operator from the front.
This corresponds to the load placed on many components made of plastic. The specimen strain is recorded over the course of the test, which often lasts 1, hours. Satm company has recently expanded its creep s2990 testing capacity by investing in two Kappa Multistation creep testing systems by ZwickRoell.
Creep tests are described in the following standards: During a creep test, specimens are subjected to aastm static load. The test results are as follows: As is the case with all flexure tests, the specimen height must be measured carefully. The test load, which is specified prior to the start of the test is based on the polymer characteristics and the intended use, is applied without jolts.